SMA SMC SB TRIPOWER PV Invereter Grid Gate-11 CEI 0-21

New 

1. Safety Instructions

1. Read Before Use: Carefully read all instructions before installation or operation.

2. Qualified Personnel Only: Installation, commissioning, and maintenance must be done by certified electricians.

3. Electrical Shock Hazard: Disconnect AC and DC power before servicing. Avoid touching live terminals.

4. Fire Risk: Keep the inverter away from flammable materials.

5. Grounding: Connect the inverter to a proper ground according to local regulations.

6. Protective Equipment: Use insulated gloves and safety goggles when handling the inverter.

2. Product Overview

• Model: SMA SMC SB Tripower

• Type: Three-phase photovoltaic inverter

• Max AC Power: 11 kW

• Input Voltage: DC 150–1000 V

• Output Voltage: AC 400 V / 50 Hz

• Efficiency: Up to 98%

Components:

• LCD display and navigation buttons

• DC input terminals (PV+) and (PV−)

• AC output terminals (L1, L2, L3, N)

• Communication ports (RS485, Ethernet)

• Cooling fan and ventilation slots

3. Installation Instructions

1. Mounting Location:

   • Indoor or sheltered outdoor area.

   • Ensure adequate airflow (minimum 10 cm from walls).

2. Mounting:

   • Secure the inverter on a wall or mounting frame using SMA-supplied brackets.

3. DC Wiring (PV Input):

   • Connect PV+ and PV− from the solar modules to the inverter.

   • Verify correct polarity.

4. AC Wiring (Grid Connection):

   • Connect L1, L2, L3, and N to the AC distribution board.

   • Install a dedicated circuit breaker for the inverter.

5. Grounding:

   • Connect the grounding terminal to the system ground according to CEI 0-21 standard.

4. Commissioning

1. Switch on DC and AC power.

2. The LCD will display the startup screen.

3. Follow the on-screen setup wizard to:

   • Select language

   • Set grid parameters (CEI 0-21)

   • Enter PV system size

4. Confirm PV voltage and grid connection.

5. Verify there are no error messages. The inverter will enter Operation Mode.

5. Operation

• LCD Display: Shows real-time voltage, current, power, energy yield, and status messages.

• Buttons:

  • Enter/OK – confirm selections

  • Arrow Keys – navigate menus

• Normal Operation: Converts DC from PV modules to AC for the grid automatically.

6. Maintenance

• Visual Inspection: Check monthly for dust, debris, or loose connections.

• Cleaning: Wipe with a dry cloth; avoid water or chemical solvents.

• Firmware Updates: Can be performed via SMA Sunny Portal or USB drive.

7. Troubleshooting

8. Technical Specifications

• Max DC voltage: 1000 V

• MPPT voltage range: 200–800 V

• Nominal AC voltage: 400 V, 50 Hz

• Max AC current: 16 A

• Efficiency: up to 98%

9. Storage & Transport

• Store in a dry, ventilated area.

• Protect from shocks and vibrations.

• Temperature range: −25°C to +60°C.